Better Buy a Spare

When you wield this 21st century writer, you’d better be prepared to pass it around the conference table. After jealously watching you effortlessly jot meeting notes, your associates will definitely be asking questions. Then mention your Yookers can write in any ink known to man!

The Yookers Felt-Tip pens literally glide across a quality paper. And, it’s refillable with a simple international ink cartridge. Even more enticing are the choices of four writing tips from extra fine to a nice broad line. Choose your favorite design and then add a few tip choices!

Use and maintenance of your Yookers Felt-Tip

Just Four Parts
Your Yookers has a felt-tip, the body and cap, and the cartridge or converter for bottle ink.

Filling Your Yookers with Ink
Remove the cap and set aside. Remove the barrel by turning it clockwise. Remove the installed ink converter with a gentle pull. You can now insert an ink cartridge into the tip. The cartridge has one end with a little ball. Place this end into the tip section and press until you feel a click. The cartridge is now allowing ink to flow to your felt-tip.

If you want to use bottle ink, place the converter into the ink and twist to draw ink up into the converter. Remove your converter from the bottle, blot the end a bit and then insert firmly into your tip section. Ink will begin to flow into your Felt-Tip.

Maintaining Your Felt-Tip Pen
Simply remove the front section by unscrewing it from the barrel section. Rinse the front section under a steady, slow stream of room temperature water. This will cause residual pigment to leave the tip. Flush until it runs clear. 

If you haven’t flushed for several cartridges, let the section soak overnight in a cup of water. After flushing or a soak, touch the tip to a paper towel and draw the residual water out. When you change ink colors, a quick flush will get you ready for your next color. A quick monthly flush will keep your tip in top condition.

Using your felt-tip pen
The Yookers Felt-Tip should glide across your paper effortlessly. Never press too firmly as it will prematurely wear out the tip. When not writing with your pen, keep it stored vertically (Like in a cupholder.) with the tip pointing up to prevent ink from settling in and clogging the feed. If you do not intend to use your Felt-Tip Yookers for more than 3-4 days, flush and store it clean. If traveling by air, we recommend either a completely full converter or completely empty. Keep the tip pointed up. Just like a fountain pen, always keep your pen capped when not in use.

Ink Supply
Bottled ink: Quality ink is the key. Any older ink (more than two years) may cause your flow to slow. Your Yookers prefers thinner inks like Colorado Pen, Waterman and Sheaffer. Black ink contains elements which may cause your tip to dry out. If you prefer to use black ink, stay with a thinner ink like those listed. If your tip does dry out, simply flush and refill.

Cartridges: Any international standard ink cartridge will work. Flush every two cartridges and your Yookers will flow perfectly.

Storing Your Felt-Tip Yookers
If you don’t plan to use your pen for a prolonged period of time, like a month, empty it out and wash the tip before storing. 

Yookers Metis Fiber Pen Matte Black


Regular Price: $55.00

Special Price $44.00

  • Overall Size - 5 1/4 in. x 1/2 in. (133mm x 13mm)
  • Body - 5 in. x 7/16 in. (125mm x 12mm)
  • Cap - 2 1/4 in. x 1/2 in. (56mm x 13mm)
  • Weight - 30 g
  • Composition - Brass
  • Appointments - Gunmetal
  • Tip - Fiber Point
  • Ink - Bottled ink converter is included
  • Engraving - The engraving on this pen will show as a gold color due to the metal barrel. Permanently perfect.

View Engraving Styles

Style 1

Style 2

Style 3

Style 4

A monogram shows your last initial in the center. The order you enter your initials will be exactly as we laser engrave them. Please check your entry.

We recommend using a black rollerball or broad tip fountain pen on plain white paper to create your signature. Then use a smartphone or a scanner to digitize it.

Your logo must be black & white. Gradients or shading will appear as solid areas.

Maximum number of characters: 28


Maximum number of characters: 28


Allowed file extensions to upload: png,jpg,psd,ai,eps,tiff


Maximum number of characters: 100

* Required


Need Assistance? Contact us at


Be the first to review this product.

Write A Review
  • Quality